SUBJECT: Defective GFCI Harnesses REVISION: 00 MODELS: All models IMPORTANT INFORMATION: Royal Vendors, Inc., has recently identified some defective Ground Fault Circuit Interruptor (GFCI) power cords manufactured by Leviton Manufacturing Co., Inc. Approximately 10% of venders manufactured by Royal Vendors from late January 2009 through the first week of March 2009 may have these faulty … [Read more...]
296. 1.0 kVA Transformer Kit Installation
SUBJECT: 1.0 kVA Transformer Kit Installation REVISION: 00 MODELS: GIII, Merlin IV, RVV NG PURPOSE: This bulletin describes the proper procedure for installing the 1.0 kVA transformer in a standard 115 VAC 60 Hz vender to convert it for use in a 230 VAC 60 Hz location. Download PDF: Service Bulletin 296 … [Read more...]
247. Quick Release Main Wiring Harness Kit Installation
SUBJECT: Quick Release Main Wiring Harness Kit Installation REVISION: 02 MODELS: Most Royal Vendors, Dixie-Narco, and Vendo models (115 VAC) PURPOSE: The Quick Release Main Wiring Harness Kits are designed to replace several different Royal Vendors, Dixie-Narco, and Vendo OEM main wiring harnesses. Four kits are available for replacing the original main wiring harnesses. The Universal kit … [Read more...]
43. Enabling / Disabling Timers
Subject: Enabling / Disabling Timers Revision: 00 Models: Merlin IV, GIII, RVV NG Tools required: None Estimated time: <1 minutes Purpose: This Helpful Hint describes how to quickly disable timers and quickly enable them again without changing the programmed start and stop times. Download PDF: Helpful Hint 43 … [Read more...]
234. Universal Caster Kit Installation
SUBJECT: Universal Caster Kit Installation REVISION: 02 MODELS: All venders (not coolers) PURPOSE: This bulletin explains the procedure for installing the Universal Caster Kit on all vender models. Download PDF: Service Bulletin 234 … [Read more...]
126. 10 oz Dole / Tropicana bottle
Product name: 10 oz Dole / Tropicana bottle Bottler / company: Tropicana Products, Inc. Volume: 10 oz. / 296 mL Package type: PET Height: 6.97 in. / 177.0 mm Diameter: 2.22 in. / 56.4 mm Weight: 0.78 lbs. / 0.35 kg Country of origin: USA Venders: MIV, RVV, RVV NG Download PDF: PVS 126 … [Read more...]
267. Refrigeration Issues Caused By Control Board Battery Replacement
SUBJECT: Refrigeration Issues Caused By Control Board Battery Replacement REVISION: 00 MODELS: All Venders with Electronic Refrigeration PURPOSE: Replacing a control board battery could affect the calibration of the vender’s temperature sensor, causing evaporator freeze-ups or warm product. This bulletin explains the corrective procedure for this issue. Download PDF: Service Bulletin 267 … [Read more...]
18. Ground Strap for the Inner Door
Subject: Ground Strap for the Inner Door Revision: 03 Models: All Venders Tools required: Phillips screwdriver, drill, 1/8” drill bit Estimated time: 1 minute Purpose: For instructions on installing a ground strap to the inner door. Download PDF: Helpful Hint 18 … [Read more...]
11. Replacing a Vend Motor (MIV)
Subject: Replacing a Vend Motor (MIV) Revision: 03 Models: Merlin IV venders Tools required: Phillips screwdriver; may also need a drill and 3/8” drill bit Estimated time: 15 minutes Purpose: This document describes the procedure for replacing a vend motor in the Merlin IV vender. Download PDF: Helpful Hint 11 … [Read more...]
6. Preventive Maintenance for Ballast Assembly
Subject: Preventive Maintenance for Ballast Assembly Revision: 03 Models: All Venders with Ballast Assembly Tools required: None Estimated time: 10 minutes Purpose: To obtain maximum efficiency of the ballast. Download PDF: Helpful Hint 6 … [Read more...]
