SUBJECT: Coin Box Housing Kit Installation REVISION: 03 MODELS: Non CDC Venders, RVCC(E), RVMC(E), RVCD(E) PURPOSE: To prevent vandals from punching out the coin cup and taking the coins from the coin box. Download PDF: Service Bulletin 205 … [Read more...]
206. Shims to vend 12 oz. Cans using a 12 oz. Can Rotor in a 16 oz. 3DP Vender
SUBJECT: Shims to vend 12 oz. Cans using a 12 oz. Can Rotor in a 16 oz. 3DP Vender REVISION: 00 MODELS: 16 oz. 3DP Vender PURPOSE: This bulletin explains the procedure for converting a 3DP vender to vend 12 oz. cans. Download PDF: Service Bulletin 206 … [Read more...]
209. Conversion of 110-5 liter Vender to vend 0.5L PET Bottles for Spain
SUBJECT: Conversion of 110-5 liter vender to vend 0.5L PET Bottles for Spain REVISION: 00 MODELS: 110-5 Liter PURPOSE: This bulletin explains the procedure for converting the 110-5 liter vender to vend 0.5L PET bottles for Spain. Download PDF: Service Bulletin 209 … [Read more...]
215. Vandal Panel Channel Installation
SUBJECT: Vandal Panel Channel Installation REVISION: 03 MODELS: All Venders PURPOSE: Adds additional security to prevent vandals from prying open the vender from the T-handle side, by allowing the outside door vandal panel to slide inside the vandal-panel channel, which removes the "prying" points. Download PDF: Service Bulletin 215 … [Read more...]
5. 110-volt Vend Counter Kit
SUBJECT: 110-volt Vend Counter Kit REVISION: 05 MODELS: Electromechanical, Merlin 2000 REASON FOR BULLETIN: This bulletin explains the procedure for installing a 110-volt vend counter on Electromechanical and Merlin 2000 venders. Download PDF: Service Bulletin 5 … [Read more...]
Electromechanical Vendor
Royal Vendors' Electromechanical Vender (all non-electronic vender models) Service & Parts Manual Includes Major Parts Explanation, Vendor Installation, Troubleshooting Tips, and Exploded Parts View with Part Numbers Download PDF: Electromechanical Vendor … [Read more...]
234. Universal Caster Kit Installation
SUBJECT: Universal Caster Kit Installation REVISION: 02 MODELS: All venders (not coolers) PURPOSE: This bulletin explains the procedure for installing the Universal Caster Kit on all vender models. Download PDF: Service Bulletin 234 … [Read more...]
233. Retrofitting Coke Venders with T8 Lighting
SUBJECT: Retrofitting Coke Venders with T8 Lighting REVISION: 02 MODELS: All venders with Coke-style doors (115 VAC only) PURPOSE: This bulletin explains the procedure for upgrading the old-style T12 lighting system to the newer, more energy-efficient T8 lighting system. Download PDF: Service Bulletin 233 … [Read more...]
6. Preventive Maintenance for Ballast Assembly
Subject: Preventive Maintenance for Ballast Assembly Revision: 03 Models: All Venders with Ballast Assembly Tools required: None Estimated time: 10 minutes Purpose: To obtain maximum efficiency of the ballast. Download PDF: Helpful Hint 6 … [Read more...]
5. Leveling leg adjustment to encourage water drainage to the rear of vender
Subject: Leveling leg adjustment to encourage water drainage to the rear of vender Revision: 01 Models: All venders Tools required: Adjustable wrench Estimated time: 3 minutes Purpose: To promote water drainage to the rear of the vender, instead of towards the door seal. Download PDF: Helpful Hint 5 … [Read more...]
