SUBJECT: Quick Release Main Wiring Harness Kit Installation REVISION: 02 MODELS: Most Royal Vendors, Dixie-Narco, and Vendo models (115 VAC) PURPOSE: The Quick Release Main Wiring Harness Kits are designed to replace several different Royal Vendors, Dixie-Narco, and Vendo OEM main wiring harnesses. Four kits are available for replacing the original main wiring harnesses. The Universal kit … [Read more...]
234. Universal Caster Kit Installation
January 11, 2008 by ·
SUBJECT: Universal Caster Kit Installation REVISION: 02 MODELS: All venders (not coolers) PURPOSE: This bulletin explains the procedure for installing the Universal Caster Kit on all vender models. Download PDF: Service Bulletin 234 … [Read more...]
288. North American Daylight Saving Time Update
October 8, 2007 by ·
SUBJECT: North American Daylight Saving Time Update REVISION: 00 MODELS: MOST (see bulletin) PURPOSE: Effective the 1st of July, 2007, all Royal Vendors controllers in current production are compliant with the new regulations concerning Daylight Saving Time (DST) in North America. This bulletin describes the correct procedure for updating certain controllers which are already in the market … [Read more...]
283. GFCI Main Wiring Harness Implementation
March 13, 2007 by ·
SUBJECT: GFCI Main Wiring Harness Implementation REVISION: 00 MODELS: All venders built for use in the USA (including Puerto Rico) and Canada PURPOSE: Effective April 2007, all new venders are required to have a GFCI (Ground Fault Circuit Interrupter) built into the main wiring harness coming from the power source (wall outlet). This change has been legally mandated by Underwriters … [Read more...]
38. Disabling Milk Merchandiser Health Sensor
June 5, 2006 by ·
Subject: Disabling Milk Merchandiser Health Sensor Revision: 00 Models: Milk Merchandisers Tools required: None Estimated time: <1 minutes Purpose: The Milk Merchandiser’s health sensor is not required for aseptic products. This Helpful Hint describes the procedure for disabling this health sensor. NOTE: The health sensor cannot be disabled on control boards with EEPROM revision … [Read more...]
32. Proper Depth Setting on Milk Venders
February 10, 2005 by ·
Subject: Proper Depth Setting on Milk Venders Revision: 00 Models: Milk Merchandiser Tools required: None Estimated time: <1 minute Purpose: Proper depth setting on Milk venders is essential, especially for selections vending bottles from rear columns. When set incorrectly, the vend motors in rear columns may not turn far enough for the bottle to drop from the column, resulting in a … [Read more...]
251. Installation of the Merlin Packaging Kit
July 5, 2004 by ·
SUBJECT: Installation of the Merlin Packaging Kit REVISION: 00 MODELS: Merlin IV, Milk PURPOSE: Before shipping and storing the Merlin venders, the Merlin Packaging Kit should be installed to prevent damage to the venders. Download PDF: Service Bulletin 251 … [Read more...]
1. Tropicana / Dole Fruit Juice
May 20, 2004 by ·
Product name: Tropicana / Dole Fruit Juice Bottler / company: Tropicana Products, Inc. Volume: 16 oz. / 473 mL Package type: PET Height: 7.74 in. / 19.7 cm Weight: 1.20 lb. / 0.55 kg Diameter: 2.64 in. / 6.7 cm Country of origin: USA Venders: Merlin IV, TDV, Milk Download PDF: PVS 1 … [Read more...]
28. Installation of the Multi-Layer Control Board
April 6, 2004 by ·
Subject: Installation of the Multi-Layer Control Board Revision: 02 Models: Merlin IV, Merlin 20+, Milk Merchandiser, EZ Vender Tools required: None Estimated time: 10 minutes Purpose: Beginning in mid-December 2001, all new Merlin venders have a Multi-Layer Control Board, instead of the older single-layer board. The design of this new board provides better protection against … [Read more...]
245. Merlin Electrical Noise Filter Kit Installation
January 30, 2004 by ·
SUBJECT: Merlin Electrical Noise Filter Kit Installation REVISION: 00 MODELS: Merlin IV, Milk Merchandiser, and EZ Vender with Multi-Layer control board PURPOSE: Due to electromagnetic noise, on some Merlin IV, Milk Merchandiser, and EZ Venders with Multi-Layer control boards it may appear difficult or impossible to adjust the delivery chute sensor’s sensitivity. These boards also may have a … [Read more...]
