SUBJECT: Main Door Stop Kit Installation REVISION: 00 MODELS: All conventional venders with rocker-type door switch PURPOSE: This bulletin describes the procedure for installing the main door stop kit, which is designed to secure the vender's door to keep it from swinging farther out than desired. Download PDF: Service Bulletin 370 … [Read more...]
368. Rodent Guard Kit Installation
January 25, 2013 by ·
SUBJECT: Rodent Guard Kit Installation REVISION: 00 MODELS: GIII ADA venders PURPOSE: The rodent guard kit is designed to block and prevent small vermin from entering the vender. This bulletin explains the procedure for installing this kit. Download PDF: Service Bulletin 368 … [Read more...]
269. Removal and Replacement of the RVV NG Product Cup
January 15, 2013 by ·
SUBJECT: Removal and Replacement of the RVV NG Product Cup REVISION: 01 MODELS: All RVV NG venders PURPOSE: This bulletin describes the proper procedure for removing and replacing the product cup on the RVV 500. Download PDF: Service Bulletin 269 … [Read more...]
65. Health Safety Controller Test
January 15, 2013 by ·
Subject: Health Safety Controller Test Revision: 01 Models: RVCH-027, RVCFH-027 Tools required: Phillips screwdriver Estimated time: 5 minutes Purpose: This document describes the procedure for testing the safety locking mechanism on the Royal Vendors Coolers and Freezers with Health Safety Controllers installed. Download PDF: Helpful Hint 65 … [Read more...]
64. RVV Generation II Fascia Replacement
November 1, 2012 by ·
Subject: RVV Generation II Fascia Replacement Revision: 00 Models: RVV Generation II Tools required: Phillips screwdriver; ratchet; 1/4" (12 mm) and 11/32" (6 mm) wrenches, sockets, and nut drivers; long extension for sockets Estimated time: 25 minutes (experienced technicians) Purpose: This Helpful Hint describes the procedure for replacing the fascia on a Royal Vendors RVV Generation … [Read more...]
181. Tropicana 15.2 oz bottle
October 29, 2012 by ·
Product name: Tropicana 15.2 oz bottle Bottler / company: Tropicana Products, Inc. Volume: 15.2 oz. / 450 mL Package type: PETE Height: 7.50 in. / 190.3 mm Diameter: 2.64 in. / 67.2 mm Weight: 1.10 lbs. / 0.50 kg Country of origin: USA Venders: MIV, TDV, RVV NG Download PDF: PVS 181 … [Read more...]
229. KO Controller Conversion Kit Installation
October 25, 2012 by ·
SUBJECT: KO Controller Conversion Kit Installation REVISION: 04 MODELS: GII, GIII PURPOSE: Beginning the last week of November 2001, the GIII EVS control board was replaced with the new GIII KO control board in production. The KO board is also available for retrofitting in the older GII and GIII venders. Download PDF: Service Bulletin 229 … [Read more...]
308. RVV 500 Plus Port Assembly Upgrade Kit Installation Instructions
August 6, 2012 by ·
SUBJECT: RVV 500 Plus Port Assembly Upgrade Kit Installation Instructions REVISION: 03 MODELS: RVV 500 PURPOSE: This bulletin describes the proper procedure for installing the RVV 500 Plus Port Assembly in place of the older non-Plus assembly. Download PDF: Service Bulletin 308 … [Read more...]
180. Nestea straight wall bottle
June 29, 2012 by ·
Product name: Nestea straight wall bottle Bottler / company: The Coca-Cola Company Volume: 20 oz. / 591 mL Package type: PETE Height: 9.13 in. / 232.0 mm Diameter: 2.61 in. / 66.3 mm Weight: 1.25 lbs. / 0.56 kg Country of origin: USA Venders: GIII, TDV, RVV NG Download PDF: PVS 180 … [Read more...]
359. GIII Plus Validator Adapter Plate Installation
June 8, 2012 by ·
SUBJECT: GIII Plus Validator Adapter Plate Installation REVISION: 00 MODELS: All GIII Plus models PURPOSE: This bulletin describes the procedure for installing the Validator Adapter Plate, which allows for the installation of both a bill validator and a card reader in the GIII Plus venders. Download PDF: Service Bulletin 359 … [Read more...]
