SUBJECT: Wall Spacer Kit Installation REVISION: 00 MODELS: RVV (Serial number 200441MA00001 and after) PURPOSE: The Wall Spacer Kit was designed to prevent the RVV from being pushed all the way against a wall, allowing for air flow to the rear of the refrigeration area. Without air circulation in this area, the vender’s refrigeration unit cannot work properly. Download PDF: Service … [Read more...]
Archive: Documentation
255. RVV Software Upgrade Kit Installation (Model 400 only)
SUBJECT: RVV Software Upgrade Kit Installation (Model 400 only) REVISION: 01 MODELS: RVV (control boards lower than 4.268 software revision) PURPOSE: When upgrading the software on RVV control boards with software revisions lower than 4.268, it is necessary to not only change the controller chip on the control board, but also to move the product sensing switch. This bulletin describes the … [Read more...]
252. Installing the Shorter T-handle Stud
SUBJECT: Installing the Shorter T-handle Stud REVISION: 00 MODELS: RVV PURPOSE: The Shorter T-handle Stud was designed for installation in Royal Vision Venders (RVV) before serial number 200419MA00001 to lessen the number of turns needed to completely shut and seal the door. This bulletin explains the proper procedure for installing this stud. Download PDF: Service Bulletin 252 … [Read more...]
253. Replacing the Glass Panel
SUBJECT: Replacing the Glass Panel REVISION: 00 MODELS: RVV PURPOSE: This bulletin describes the proper procedure for replacing the glass panel on the Royal Vision Vender (RVV). Download PDF: Service Bulletin 253 … [Read more...]
251. Installation of the Merlin Packaging Kit
SUBJECT: Installation of the Merlin Packaging Kit REVISION: 00 MODELS: Merlin IV, Milk PURPOSE: Before shipping and storing the Merlin venders, the Merlin Packaging Kit should be installed to prevent damage to the venders. Download PDF: Service Bulletin 251 … [Read more...]
1. Tropicana / Dole Fruit Juice
Product name: Tropicana / Dole Fruit Juice Bottler / company: Tropicana Products, Inc. Volume: 16 oz. / 473 mL Package type: PET Height: 7.74 in. / 19.7 cm Weight: 1.20 lb. / 0.55 kg Diameter: 2.64 in. / 6.7 cm Country of origin: USA Venders: Merlin IV, TDV, Milk Download PDF: PVS 1 … [Read more...]
248. Installation of the RVV Milk Conversion Kit (Model 400 only)
SUBJECT: Installation of the RVV Milk Conversion Kit REVISION: 00 MODELS: RVV (Model 400 only) PURPOSE: Before loading perishable items in the Royal Vision Vender (RVV), a health safety sensor must be installed and enabled. This bulletin describes the proper procedure for installing the RVV Milk Conversion Kit, which includes this health safety sensor. Download PDF: Service Bulletin 248 … [Read more...]
28. Installation of the Multi-Layer Control Board
Subject: Installation of the Multi-Layer Control Board Revision: 02 Models: Merlin IV, Merlin 20+, Milk Merchandiser, EZ Vender Tools required: None Estimated time: 10 minutes Purpose: Beginning in mid-December 2001, all new Merlin venders have a Multi-Layer Control Board, instead of the older single-layer board. The design of this new board provides better protection against … [Read more...]
31. Replacing RVV Cell Assemblies with Original Lockout Mechanism (RVV 400)
Subject: Replacing RVV Cell Assemblies with Original Lockout Mechanism Revision: 00 Models: RVV 400 Tools required: Phillips screwdriver Estimated time: <1 minute Purpose: Beginning with serial number 200412MA00005, the cell lockout mechanism was changed in all RVV’s. All cell assemblies built thereafter lack a bushing which is required with the older cell lockout mechanism. Not … [Read more...]
246. Port Shield Installation
SUBJECT: Port Shield Installation REVISION: 00 MODELS: All CCR models PURPOSE: The CCR port shield is designed to prevent vandalism by adding reinforcement to the vender’s port panel. This bulletin describes the proper installation procedure for this part. Download PDF: Service Bulletin 246 … [Read more...]


