SUBJECT: Installation of the Merlin Packaging Kit REVISION: 00 MODELS: Merlin IV, Milk PURPOSE: Before shipping and storing the Merlin venders, the Merlin Packaging Kit should be installed to prevent damage to the venders. Download PDF: Service Bulletin 251 … [Read more...]
248. Installation of the RVV Milk Conversion Kit (Model 400 only)
April 20, 2004 by ·
SUBJECT: Installation of the RVV Milk Conversion Kit REVISION: 00 MODELS: RVV (Model 400 only) PURPOSE: Before loading perishable items in the Royal Vision Vender (RVV), a health safety sensor must be installed and enabled. This bulletin describes the proper procedure for installing the RVV Milk Conversion Kit, which includes this health safety sensor. Download PDF: Service Bulletin 248 … [Read more...]
28. Installation of the Multi-Layer Control Board
April 6, 2004 by ·
Subject: Installation of the Multi-Layer Control Board Revision: 02 Models: Merlin IV, Merlin 20+, Milk Merchandiser, EZ Vender Tools required: None Estimated time: 10 minutes Purpose: Beginning in mid-December 2001, all new Merlin venders have a Multi-Layer Control Board, instead of the older single-layer board. The design of this new board provides better protection against … [Read more...]
31. Replacing RVV Cell Assemblies with Original Lockout Mechanism (RVV 400)
March 19, 2004 by ·
Subject: Replacing RVV Cell Assemblies with Original Lockout Mechanism Revision: 00 Models: RVV 400 Tools required: Phillips screwdriver Estimated time: <1 minute Purpose: Beginning with serial number 200412MA00005, the cell lockout mechanism was changed in all RVV’s. All cell assemblies built thereafter lack a bushing which is required with the older cell lockout mechanism. Not … [Read more...]
246. Port Shield Installation
March 10, 2004 by ·
SUBJECT: Port Shield Installation REVISION: 00 MODELS: All CCR models PURPOSE: The CCR port shield is designed to prevent vandalism by adding reinforcement to the vender’s port panel. This bulletin describes the proper installation procedure for this part. Download PDF: Service Bulletin 246 … [Read more...]
30. Counter and Refrigeration Revisions to Merlin Menus
February 26, 2004 by ·
Subject: Counter and Refrigeration Revisions to Merlin Menus Revision: 00 Models: Merlin IV Controllers Revision 67100-9 and Higher; Merlin TDV Revision 67160-6 and Higher Tools required: N/A Estimated time: N/A Purpose: The Internal (Service) Menu in Merlin IV and Merlin Triple-Depth Venders has been changed. The Refrigeration Mode (“FriG”) has been revised to include Energy … [Read more...]
245. Merlin Electrical Noise Filter Kit Installation
January 30, 2004 by ·
SUBJECT: Merlin Electrical Noise Filter Kit Installation REVISION: 00 MODELS: Merlin IV, Milk Merchandiser, and EZ Vender with Multi-Layer control board PURPOSE: Due to electromagnetic noise, on some Merlin IV, Milk Merchandiser, and EZ Venders with Multi-Layer control boards it may appear difficult or impossible to adjust the delivery chute sensor’s sensitivity. These boards also may have a … [Read more...]
233. Retrofitting Coke Venders with T8 Lighting
January 23, 2004 by ·
SUBJECT: Retrofitting Coke Venders with T8 Lighting REVISION: 02 MODELS: All venders with Coke-style doors (115 VAC only) PURPOSE: This bulletin explains the procedure for upgrading the old-style T12 lighting system to the newer, more energy-efficient T8 lighting system. Download PDF: Service Bulletin 233 … [Read more...]
243. Version 41.xx Chip Replacement
November 12, 2003 by ·
SUBJECT: Version 41.xx Chip Replacement REVISION: 00 MODELS: Merlin IV with Versatile Control Board (Revision 41.xx) PURPOSE: This bulletin shows the correct procedure for replacing the Merlin IV Rev. 41.XX (Versatile control board) EEPROM chip. Download PDF: Service Bulletin 243 … [Read more...]
242. Incorrect Vending In 20+ Due To Bad Optic Sensor Boards
October 20, 2003 by ·
SUBJECT: Incorrect Vending In 20+ Due To Bad Optic Sensor Boards REVISION: 00 MODELS: All 20+ Models PURPOSE: Some 20+ Venders built prior to 200341 may have the potential of multi-vends (multiple drinks for one purchase) or no-vends (stealing money), due to bad optic sensor boards. Download PDF: Service Bulletin 242 … [Read more...]
