Archive: Service Bulletins

407. Merlin IV NG Controller Retrofit Kit Installation

SUBJECT: Merlin IV NG Controller Retrofit Kit Installation REVISION: 00 MODELS: All Merlin IV models prior to serial number 201716GA00001 PURPOSE: This bulletin describes the procedure for installing the new Merlin IV NG controller in place of the smaller, older-style Merlin IV controller. Download PDF: Service Bulletin 407 … [Read more...]

346. Cooler Caster Kit Installation

SUBJECT: Cooler Caster Kit Installation REVISION: 02 MODELS: Royal Vendors Coolers PURPOSE: This bulletin explains the procedure for installing caster kits on Royal Vendors Coolers. Download PDF: Service Bulletin 346 … [Read more...]

404. Model 10 / 12 Cooler Caster Kit Installation

SUBJECT: Model 10 / 12 Cooler Caster Kit Installation REVISION: 00 MODELS: Model 10 / 12 Coolers PURPOSE: This bulletin describes the process for installing casters on the Model 10 and 12 Coolers. Download PDF: Service Bulletin 404 … [Read more...]

403. 3D Vis Sign Installation on RVV Gen II

SUBJECT: 3D Vis Sign Installation on RVV Gen II REVISION: 00 MODELS: KO RVV 500 Gen II PURPOSE: This bulletin describes the process for installing a Coca-Cola 3D Vis-style sign on RVV Gen II. Download PDF: Service Bulletin 403 … [Read more...]

402. Malformed GIII Adjustable Long Product Stops

SUBJECT: Malformed GIII Adjustable Long Product Stops REVISION: 00 MODELS: GIII Plus venders BACKGROUND INFORMATION: Some GIII Plus venders manufactured from production weeks 201544 to 201605 may have malformed long adjustable product stops. It is important to note that a majority of the product stops during this time period are formed correctly; the issue with malformed parts is … [Read more...]

400. Health Sensor Field Test

SUBJECT: Health Sensor Field Test (Full-cycle Sensor-controlled Test) REVISION: 00 MODELS: All Coolers and Freezers with Health Safety Controllers TOOLS REQUIRED: Phillips screwdriver ESTIMATED TEST PROCEDURE TIME: About 45 minutes PURPOSE: The procedure below can be used to determine whether or not the equipment's Health Safety Controller functions correctly. Download PDF: Service … [Read more...]

401. Coin Deflector Kit Installation

SUBJECT: Coin Deflector Kit Installation REVISION: 00 MODELS: GIII venders with Center Door Changer PURPOSE OF THIS BULLETIN: This bulletin describes the procedure for installing the coin deflector kit in GIII venders with Center Door Changers. Download PDF: Service Bulletin 401 … [Read more...]

399. Reinforced T-handle Lock Cylinder Cover Kit Installation

SUBJECT: Reinforced T-handle Lock Cylinder Cover Kit Installation REVISION: 00 MODELS: All ADA venders and GIII Marketing PURPOSE OF THIS BULLETIN: The reinforced T-handle lock cylinder cover blocks off the T-handle to prevent access to the latch cylinder by vandals. Download PDF: Service Bulletin 399 … [Read more...]

398. 20 oz Anti-bridging Kit for Merlin IV

SUBJECT: 20 oz Anti-bridging Kit for Merlin IV REVISION: 00 MODELS: 72" Merlin IV (models 650 and 542) PURPOSE OF THIS BULLETIN: In certain vintages of Merlin IV venders, bridging may occur with some 20 ounce bottles. In the event this occurs, this anti-bridging kit should alleviate the issue. Download PDF: Service Bulletin 398 … [Read more...]

397. Optimized Placement of Bimetal Switch

SUBJECT: Optimized Placement of Bimetal Switch REVISION: 02 MODELS: Freezer PURPOSE OF THIS BULLETIN: On Royal Vendors Freezers with serial numbers 201518RA00054 and before, the bimetal switch in the refrigeration assembly was placed on the 1/4" line going into the expansion valve, which may not allow the cabinet to pull down to the correct temperature. This bulletin explains the procedure … [Read more...]